Pink Leather Cards Case

Last weekend I thought of making a simple and very  quick project I’ve been thinking over for a couple of weeks. The project was inspired by the Leather Cover Tutorial. I used the small piece of pink leather and the yellow elastic to make a handmade cards case. Here’s what you will need:

Materials:

– Piece of leather
– Paper knife
– Elastic of two types
– Piece of cardboard
– Xtra strong glue
– Paper clip


Step. 1 Print the pattern
Step. 2 Cut out the piece of leather according to pattern.
Step. 3  Fold the leather piece by the line marked at the pattern and make a small hole with a needle or sharp stick.
Step. 4 Cut the elastic string. You will need a length around 9 cm/3.5″. Then fold it in half and punch through the hole from the reverse side. Make sure that the loop is not too long and tie a knot.
Step. 5 Now fold the part which will serve as the inner pocket and use the Xtra strong glue to keep both sides together. I also used the paper clips to keep the sides from unfolding.
Step. 6 Check the instructions of your glue to find out the waiting time for the glue to fix. Only after this time has passes – remove the paper clips.
Done! Use the leather card holder for your reward cards, business cards or credit cards. The leather will secure them from folds and scratches.
 


Comments

comments

You may also like...

Leave a Reply to Anonymous Cancel reply

Your email address will not be published. Required fields are marked *